DIY Solder-In Oscilloscope Probes - Workbench Wednesdays

When you cannot get an oscilloscope probe into a tight spot, can you just use a piece of wire? Sometimes. When signal integrity matters, you CAN use a low-cost DIY solder-in probe. These probes attenuate the signal and use an oscilloscope’s high-bandwidth 50-ohm input. James shows how to build some solder-in probes when they work and when they do not work in this video. Special thanks to Shabaz on the element14 community for the guide used here.

Engage with the element14 presents team on the element14 Community - suggest builds, find project files and behind the scenes video: https://bit.ly/3tmdewv

Visit the element14 Community for more great activities and free hardware:

Tech spotlights: https://bit.ly/3qPrDhM
RoadTest and Reviews: https://bit.ly/3pV5Bux
Project14: https://bit.ly/31wbnJY

#0:00 Welcome to Workbench Wednesdays
#1:08 Resistive Divider Probes
#3:53 Digital Signal
#6:58 Crystal Example
#8:27 Give your Feedback

#Oscilloscope #OscilloscopeProbe